jon boat deck kit
These decked-out jon boats might make a bass boat guy jealous. fishing season is upon us! if you haven't already noticed, ice is melting everywhere and the fish are going to start biting. hopefully, you have a nice boat to get out on the water and get after it. however, if you don't, perhaps a minimal investment in a jon boat might be in order.. Bobby armentrout - jon boat mods. since i used as inspiration one of the boats linked on your site, i have taken some photos of my lowe 1448 mod-v jon. i primed it with self-etching primer, and painted it with automotive paint. to make the decks, i added aluminum frame trusses (to support the deck).. Deck your jon boat to provide an area to mount a fish-fighting chair and get a higher vantage point for fishing. decking is usually done in three parts: forward, stern and middle. typically, the middle deck is lower. reinforce your deck with fiberglass-taped, wooden braces. sealing the wood prevents warping. use. 
jon boat deck kit Try to aim for a jon boat that is at least 48″ wide. this is a good minimum width if you’re looking to install decking onto the boat. sure, you can still deck a jon boat that is under 48″ wide, but it will almost certainly be much more difficult and possibly unsafe. a boat with a narrow width will almost always have a number of issues. For this jon boat setup, the motor i have on it is an sps swamp runner longtail mud motor.. the engine is a 420cc 13hp predator engine from harbor freight paired with the sps swamp runner medium mud motor kit.. this motor will push this boat through anything as long as the prop has something to grip. if i am on dry land where the prop doesn’t work, the boat is light enough to where i can.