how to build jon boat trailer
Rebuilding my boat trailer, adding carpeted bunks and metal structure to the frame! easy load and unload process. jon fishin': the ultimate boat build - duration: 10:24. academy sports. Here is a diy boat trailer guide installation that i did for less than $20.00 . i installed my guides on a 14 foot mcclain boat trailer that i purchased from academy sports. thanks for watching. Making your own small wooden boat trailer for a flat-bottom rowboat will save you a lot of money compared to the cost of buying one --- and, using some simple-to-understand steps, building the trailer should be a relatively easy task. the trailer will be 10 feet long with a rectangle load-bearing area measuring 4 feet wide by 8 feet long.. 
how to build jon boat trailer On a lightweight boat such as an aluminum jon boat, a pair of bunks (one on each side) are sufficient to handle the load. in general, the bigger the boat, the more bunks need to be underneath for support. the downside is that it’s often harder to launch and load boats from bunk trailers.. My boat is 10 ft long and i plan to have the boat hang off the back of the trailer 1 foot. so my 11 ft overall length trailer should be fine. there were 4 bolts holding the old tongue onto the frame. i removed those pretty easily and mocked up the new tongue..
